Waterproof Materials

EUROSKIN P40 Self-Adhesive Polymer Modified Bitumen Waterproof Membrane uses aluminum foil PET film as surface reinforcing material, covered with asphalt adhesive which contains active agent rubber.

EUROSKIN P40 can be applied with polymer cement mortar in construction (wet-applied method) or directly by the dry-applied method. It is especially suitable for intermittent construction projects. Fewer wrinkles and bulges occur when the membrane is exposed for a long time after construction.

AQUAPRUFE LP-92 is a one-component moisture-cured polyurethane waterproof coating. It reacts with the moisture in the air and cures to form a non-toxic and highly elastic coat with excellent waterproofing performance.

AQUAPRUFE MH-01 is an excellent waterproofing solution for underground structures and tunnels. It is composed of HDPE sheet, pressure-sensitive adhesive layer and special particulate layer. It is loose-laid on blinding layer and later bonds with freshly poured concrete to form a fully-bonded waterproof system.

EUROSKIN N50 Non-Curing Rubberized Bitumen Waterproof Coating is a new type of hot melt bitumen waterproof coating with high solid content. It does not cure after long exposure to air, maintaining viscous rubber characteristics and strong self-healing capacity. It bonds immediately upon touching and it is difficult to peel off.

EUROSKIN N50 can solve the problem of cracking, fatigue damage and aging under high stress caused by the transfer of stress from the cracking substrate to the waterproofing layer. Meanwhile, the stickiness ensures that it fills pores and cracks of substrate to avoid water channeling and is compatible with many waterproof membranes.

AQUAPRUFE LC-98 is a 2-part high polymer elastic cementitious waterproof coating, which consists of acrylic latex, cement and other inorganic additives. It has great elasticity and impermeability.

AQUAPRUFE LA-06 is a 1-part water-based waterproof coating composed of high-quality acrylic emulsion and other additives. It is easy to apply and suitable for waterproofing works in different parts.

AQUAPRUFE LP-91 is two-component polyurethane waterproof coating with excellent elasticity and impermeability once cured. Part A is mainly composed of polyether and isocyanate. Part B contains several additives and fillers.

Aquaprufe LR-05 is a water-based coating specially designed for exposed roof waterproofing. It is made of rubber emulsion as the base material, together with high-grade resin emulsion, additives and fillers. The product has excellent extensibility, UV resistance, water resistance, acid and alkali resistance. It is ready-to-use once open and can be exposed directly after application, without protective layer. LR-05 is especially suitable for waterproof treatment and repair works of roofs.

AQUAPRUFE MB-45 uses aluminized PET as carrier film, which is covered with rubber bitumen adhesive material together with active agents. MB-45 is particularly suitable for intermittent waterproofing projects for it effectively minimizes the occurrence of wrinkles and bubbling even when the membrane remains exposed for extended periods after construction.