Self-Adhesive Polymer Modified Bitumen Waterproof Membrane
EUROSKIN P40 Self-Adhesive Polymer Modified Bitumen Waterproof Membrane uses aluminum foil PET film as surface reinforcing material, covered with asphalt adhesive which contains active agent rubber.
EUROSKIN P40 can be applied with polymer cement mortar in construction (wet-applied method) or directly by the dry-applied method. It is especially suitable for intermittent construction projects. Fewer wrinkles and bulges occur when the membrane is exposed for a long time after construction.
Uses
Roof and underground waterproofing works
Concealed waterproof engineering covered with a protective layer
Advantages
Strong bonding property
Great tensile strength
Excellent waterproofing performance
High reflectivity of sunshine
Prolong the service life of membrane
Reduce the indoor temperature of the building
Physical Properties
Property | Testing Method | Result |
Tensile strength (horizontal and vertical) – MPa | ASTM D412 modified | ≥3.0 |
Elongation at break of asphalt (horizontal and vertical) - % | ASTM D412 modified | ≥150 |
Peeling strength with post-cast concrete – N/mm | ASTM D903 | ≥1.5 |
Tear strength – N | ASTM D624 (right angle tearing, speed 500mm/min) | ≥20 |
Hydrostatic pressure resistance - m | ASTM D5385 | 70 |
Low-temperature flexibility | - | -20℃, no cracks |
Application Procedures
DRY APPLY: Substrate cleaning - Coating substrate treating agent - Membrane positioning - Membrane application - Lapped edge treatment - Quality check
WET APPLY: Substrate preparation - Cement slurry preparation - Paving mortar - Membrane application - Lapped edge treatment - Quality check
Recommended Waterproof System
Supply
1m (width) x 20m (length) each roll. Thickness: 1.2mm, 1.5mm and 2.0mm.
Storage
Store in a cool, ventilated place, away from fire and heat sources.
